A hydrocyclone that feeds material in an involute direction. 【Processing capacity】: ≤542m³/h 【Scope of application】: The working modes of Xinhai hydrocyclone include: classification, concentration, dehydration, desliming, sand removal, washing, ultra-fine classification, etc.
The feeding port of the hydrocyclone adopts the involute direction to feed the material, which increases the centrifugal force of the material, improves the classification effect and greatly reduces the wear of the feeding box;
The use of the involute method can reduce the turbulent flow caused by the sudden divergence of the material when it enters the cyclone, and the slurry runs smoothly inside the cyclone, thereby improving the separation performance of the cyclone and reducing the impact of the material on the feeding box. impact wear;
The length ratio of the cylindrical cone section of the hydrocyclone and the insertion depth of the overflow pipe are reasonable, and the classification efficiency is higher;
With wear-resistant rubber as the inner lining, the service life can be extended by 2-4 times;
The structure design is reasonable, the grading index is high, and the index fluctuation is small.
The working principle of Xinhai hydrocyclone is centrifugal sedimentation, when two phases (or three phases) mixed liquid is fed into hydrocyclone by a certain pressure liquid and produces strong three-dimensional-elliptic rotational movement. Due to the different density of particles, the centrifugal force, the centripetal buoyancy and drag force is different. So most coarse particles (or heavy phase) are discharged from cyclone underflow outlet, and the fine particles (or light phase) from the overflow tube, so as to achieve separation.
| Model | Spec. | Processing Capacity (m3/h) | Partition Size (μm) | Diameter of Overflow Port (mm) | Diameter of Dust- Setting Nozzle (mm) | Inlet Pressure (MPa) |
| XC II F 150 | 150 | 10 ~23 | 25 ~74 | 30 ~50 | 8~22 | 0.06~0.15 |
| XC II F 200 | 200 | 17 ~38 | 28 ~80 | 40 ~65 | 16 ~32 | |
| XC II F 250 | 250 | 24 ~53 | 30 ~82 | 65~100 | 16 ~40 | |
| XC II F 300 | 300 | 40~100 | 36 ~90 | 65~120 | 20 ~40 | |
| XC II F 350 | 350 | 56~118 | 40~100 | 80~120 | 30 ~70 | |
| XC II F 375 | 375 | 74~157 | 42~105 | 90~135 | 30 ~70 | |
| XC II F 450 | 450 | 90~192 | 44~110 | 100~150 | 30 ~70 | |
| XC II F 500 | 500 | 128~300 | 50~115 | 130~220 | 35~100 | |
| XC II F 550 | 550 | 155~368 | 52~120 | 140~240 | 35~100 | |
| XC II F 600 | 600 | 200~468 | 57~125 | 160~260 | 65~110 | |
| XC II F 660 | 660 | 237~524 | 60~130 | 180~280 | 80~150 |
During the classification process of a gold mine, it was found that the classification effect was poor and the solid-liquid separation was not obvious, so several hydrocyclones were added. Xinhai's grading cyclone equipment adopts involute feeding method. This involute feeding port is beneficial to increase the centrifugal force of the material, improve the grading effect, greatly reduce the wear of the feeding box, and the grading index is high. Indicators fluctuate less. Customers are very satisfied in the actual application process.
+86 18733132385
